15
30˚
30˚
30˚
30˚
Confirm that the neutral indicator, reverse indicator
and high beam indicator are all installed in the correct
position and angle.
A: Neutral indicator
B: Reverse indicator
C: High beam indicator (For E-17)
Install the bracket to the steering head cover.
A: Steering head cover
B: Bracket
C: 5 × 12 mm tapping screw
Install the neutral, reverse and high beam indicator
light bulbs into the socket boot holes provided in the
steering head cover.
A: Indicator light bulb
B: Neutral indicator light bulb
C: Reverse indicator light bulb
D: High beam indicator light bulb (For E-17)
E: Steering head cover
F: Socket boot
#
A: Throttle cable
B: Front brake hose
C: Rear/Parking brake lever cable
D: Choke cable
E: Left switch wiring harness
F: Front brake switch lead wire
G: Parking brake switch lead
H: Rear brake switch lead wire
I: Reverse lever cable
J: Horn switch lead wire (For E-17 and 24)
K: Emergency switch lead wire (For E-17)
NOTE: Install the wiring harness to which a
blue with black tracer lead has been attached
on “N” side.
Install the wiring harness to which a blue with
red tracer lead has been attached on “R” side.
(FOR E-17 MARKET)
Install the wiring harness to which a brack with
white tracer lead has been attached on “
”
side.
The line drawings on pages 49, 50 and 51
show the proper routing of the control cables,
hose and wiring. Refer to them in addition to
following the instructions carefully.
