11
REAR/PARKING BRAKE LEVER HOLDER
Move the lever holder at the correct position.
Align the dot mark on the handlebars with the rear/
parking brake lever holder fitting surface.
A: Rear/Parking brake lever holder
B: Bolt
C: Dot mark
REVERSE CABLE
Align the dot mark on the handlebars with the mating
surface of the reverse cable bracket.
First tighten the bolt
C
of the rear side and then
tighten the bolt
D
of the front side.
A: Reverse cable bracket
B: Dot mark
C: 6 × 12 mm flange bolt
D: 6 × 12 mm flange bolt
E: Handlebars
Align the boss of the reverse cable to the groove of
the reverse cable bracket.
Tighten the lock nut.
A: Reverse cable
B: Boss
C: Reverse cable bracket
D: Groove
E: Lock nut
F: Washer
Replace the rubber boot.
A: Rubber boot
B: Groove
Make sure that the bracket has no clearance at
the rear side as shown.
Insert the boss of the rubber boot to the
groove of the reverse cable.
FRONT
