manualshive.com logo in svg

Suzuki IGNIS 2022 Series, Manual

Share
Download
Suzuki IGNIS 2022 Series Manual Download Page 81

2-57

BEFORE DRIVING

73SB7-01E

Installation with lap-shoulder seat 

belts

NOTE:

Stow the removed head restraint in the lug-

gage compartment so it will not cause

inconvenience to the occupants.

ELR type belt

80JC021

(For models with front passenger airbag

deactivation system)

Whenever possible, SUZUKI recom-

mends that child restraint systems be

installed on the rear seat. According to

accident statistics, children are safer when

properly restrained in rear seats than in the

front passenger seat.

• If you must install the child restraint sys-

tem on the front passenger’s seat, follow

instructions below.

– Deactivate the front passenger’s front

airbag by the front passenger airbag

deactivation system.

– Slide the seat to the most rear position

by the seat position adjustment lever.

– Adjust the seatback at the 5th step

inclined position (counted from most

upright position) with the seatback

angle adjustment lever.

– If your vehicle is equipped with the

seat height adjustment lever, raise the

seat to the uppermost position by the

seat height adjustment lever.

Install your child restraint system accord-

ing to the instructions provided by the child

restraint system manufacturer.
Check that the seat belt is securely

latched.

Move the child restraint system in all direc-

tions to check that it is securely installed.

When you put your child in the child

restraint system, appropriately slide the

front seat forward not to touch a part of

your child’s body.

CAUTION

Adjust the height of the rear head

restraint or remove it for fitting the

child restraint, as necessary. How-

ever, if a booster cushion not

equipped with the head restraint is

fitted, the rear seat head restraint

should not be removed. If the rear

head restraint is removed for fitting

the child restraint, you need to install

it again after removing the child

restraint.

If the child restraint is fitted improp-

erly, a child sitting in it could be

injured in a collision.

EXAMPLE

Summary of Contents for IGNIS 2022 Series



























































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands