Suzuki IGNIS 2022 Series Manual Download

Page: 313 / 570

5-55

OTHER CONTROLS AND EQUIPMENT

73SB7-01E

Selecting a folder

Turn “TUNE/FLD PUSH SOUND” knob (1)

to select a folder.

Selecting a track

• Press UP button (2) to listen to the next

track.

• Press DOWN button (3) twice to listen to

the previous track.

When DOWN button (3) is pressed

once, the track currently being played

will start from the beginning again.

Fast forwarding/rewinding a track

• Hold down UP button (2) to fast forward

the track.

• Hold down DOWN button (3) to fast

rewind the track.

Random playback

Press “RDM” button (5).

Each time the button is pressed, the mode

will change as follows:

• FOLDER RANDOM

The random indicator “F.RDM” will light.

The tracks in the current folder will be

played in random order.

• ALL RANDOM

The random indicator “RDM” will light.

The tracks in the loaded disc will be

played in random order.

Repeat playback

Press “RPT” button (4).

Each time the button is pressed, the mode

will change as follows:

• FILE REPEAT

The repeat indicator “RPT” will light.

The track currently being played will be

played repeatedly.

• FOLDER REPEAT

The repeat indicator “F.RPT” will light.

All tracks in the currently selected folder

will be played repeatedly.

OFF FOLDER RANDOM ALL RANDOM

OFF FILE REPEAT FOLDER REPEAT

Summary of Contents for IGNIS 2022 Series



























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IGNIS 2022 Series

Reviews:

Related manuals for IGNIS 2022 Series

Brands by name

Popular brands

Suzuki IGNIS 2022 Series, Manual

Search results

Summary of Contents for IGNIS 2022 Series

Reviews:

Related manuals for IGNIS 2022 Series

Brands by name

Popular brands