Suzuki IGNIS 2022 Series Manual Download Page 321

Page: 321 / 570

5-63

OTHER CONTROLS AND EQUIPMENT

73SB7-01E

Playing mode selection

1) Press the button numbered [6] of PRE-

SET buttons (8) for 1 second or longer.

2) Turn “TUNE/FLD PUSH SOUND” knob

(2).

Each time the knob is turned, the mode

will change as follows:

3) Press “TUNE/FLD PUSH SOUND”

knob (2) to select the desired mode.

NOTE:

• When the button numbered [6] of PRE-

SET buttons (8) is pressed, the previous

mode will be displayed.

Notes on iPod

Made for iPod

• iPod touch (6th generation)

• iPod touch (5th generation)

• iPod touch (4th generation)

• iPod touch (3rd generation)

• iPod touch (2nd generation)

• iPod touch (1st generation)

• iPod classic

• iPod nano (7th generation)

• iPod nano (6th generation)

• iPod nano (5th generation)

• iPod nano (4th generation)

• iPod nano (3rd generation)

• iPod nano (2nd generation)

• iPod nano (1st generation)

• iPod (5th generation)

• iPhone 6S Plus

• iPhone 6S

• iPhone 6 Plus

• iPhone 6

• iPhone 5S

• iPhone 5C

• iPhone 5

• iPhone 4S

• iPhone 4

• iPhone 3GS

• iPhone 3G

• iPhone

* Some functions may not be available

depending on the model of iPod.

iPod

53SB10504

• Use of the Made for Apple badge means

that an accessory has been designed to

connect specifically to the Apple prod-

uct(s) identified in the badge, and has

been certified by the developer to meet

Apple performance standards. Apple is

not responsible for the operation of this

device or its compliance with safety and

regulatory standards.

• Please note that the use of this acces-

sory with an Apple product may affect

wireless performance.

• Apple, iPod touch, iPod nano, iPhone,

and Lightning are trademarks of Apple

Inc., registered in the U.S. and other

countries.

PLAYLIST

ARTIST

ALBUM

SONGS

PODCAST

GENRE

AUDIOBOOK

Summary of Contents for IGNIS 2022 Series



























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IGNIS 2022 Series

Reviews:

Brands by name

Popular brands

Suzuki IGNIS 2022 Series, Manual

Search results

Summary of Contents for IGNIS 2022 Series

Reviews:

Brands by name

Popular brands