Suzuki IGNIS 2022 Series, Manual

Page: 159 / 570

2-135
BEFORE DRIVING
73SB7-01E
Rear window wiper/washer switch
68PM00240
To turn the rear wiper on, twist the rear
wiper switch on the end of the lever for-
ward to “ON” position. If your vehicle is
equipped with “INT” position, the rear
wiper operates intermittently when you
twist the switch forward to “INT” position.
To turn the rear wiper off, twist the switch
rearward to “OFF” position.
With the rear wiper in “OFF” position, twist
the switch rearward and hold it there to
spray window washer fluid.
With the rear wiper in “ON” position, turn
the switch forward and hold it there to
spray window washer fluid.
NOTICE
• To help prevent damage to the
windshield wiper and washer sys-
tem components, you should take
the following precautions:
– Do not continue to hold in the
lever when there is no windshield
washer fluid being sprayed or the
washer motor can be damaged.
– Do not attempt to remove dirt
from a dry windshield with the
wipers or you can damage the
windshield and the wiper blades.
Always wet the windshield with
washer fluid before operating the
wipers.
– Clear ice or packed snow from
the wiper blades before using the
wipers.
– Check the washer fluid level reg-
ularly. Check it often when the
weather is bad.
– Fill a reservoir 3/4 full with
washer fluid to for its expansion,
if temperature falls low enough to
freeze the fluid.
EXAMPLE
Intermittent wiper
Washer
Wiper
NOTICE
Clear ice or snow from the rear win-
dow and rear wiper blade before
using the rear wiper. Accumulated
ice or snow could prevent the wiper
blade from moving, causing damage
to the wiper motor.