manualshive.com logo in svg

Suzuki IGNIS 2022 Series, Manual

Share
Download
Suzuki IGNIS 2022 Series Manual Download Page 203

3-41

OPERATING YOUR VEHICLE

73SB7-01E

Eco-Cool (if equipped)

When driving while using the air condi-

tioner, cold air is stored in the cooling stor-

age medium of the air conditioner unit.

Since stored cold air will be blown into the

vehicle when the engine has been stopped

automatically by the ENG A-STOP system,

the rise of the inside temperature can be

reduced when the air conditioner is not

running.
For the automatic heating and air condi-

tioning system, reducing the rise of the

inside temperature increases the length of

time that the engine is stopped automati-

cally, leading to improved fuel economy.

NOTE:

Sufficient amount of cold air may not be

stored when the vehicle has just started to

run or gets stuck in a traffic jam.

I/S AC Settings (if equipped)

• When using the automatic heating and

air conditioning system (if equipped),

you can select one of the following set-

tings via the setting mode of the informa-

tion display.

– Standard

– Economy

– Comfort

For details on how to use the information

display, refer to “Information display” in

the “BEFORE DRIVING” section.

• When “Economy” is selected, engine

auto stop condition is eased, compared

with “Standard”. Engine auto stop condi-

tion will occur more frequently and the

stop time will be longer, leading to reduc-

tion of fuel consumption.

• When “Comfort” is selected, engine auto

stop condition becomes severe, com-

pared with “Standard”. Engine auto stop

condition will occur less frequently and

the stop time will be shorter, leading to

more comfortable cabin condition by air

conditioner.

Cruise control (if equipped)

The cruise control system allows you to

maintain a steady speed without keeping

your foot on the accelerator pedal. The

controls for operating the cruise control

system are on the steering wheel.
You can use the cruise control system

under the following conditions:

• For manual transmission vehicle, the

gear position is in 3rd, 4th or 5th.

• For CVT vehicle, the select lever is in “D”

position, or the gear position is in 3rd,

4th, 5th, 6th or 7th in the manual mode

(if equipped).

• The vehicle speed is about 45 km/h (28

mph) or higher.

WARNING

To help avoid loss of vehicle control,

do not use the cruise control system

when driving in heavy traffic, on slip-

pery or winding roads, or on steep

downhills.

Summary of Contents for IGNIS 2022 Series



























































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands