manualshive.com logo in svg

Suzuki IGNIS 2022 Series, Manual

Share
Download
Suzuki IGNIS 2022 Series Manual Download Page 136

2-112

BEFORE DRIVING

73SB7-01E

Anti-lock brake system (ABS) warn-

ing light

65D529

When the ignition switch is turned to “ON”

position or the engine switch is pressed to

change the ignition mode to ON, this light

comes on briefly so you can check that the

light is working.

If the light stays on or comes on when driv-

ing, there may be something wrong with

the ABS.
If this happens: 

1) Pull off the road and stop carefully.

2) Turn the ignition switch to “LOCK” or

change the ignition mode to LOCK

(OFF) by pressing the engine switch

and then start the engine again.

If the warning light comes on briefly and

then turns off, the system is normal. If the

warning light still stays on, something is

wrong with the system.
If the light and the brake system warning

light stay on or come on simultaneously

when driving, your ABS system is

equipped with the rear brake force control

function (proportioning valve function) and

there may be something wrong with both

the rear brake force control function and

the anti-lock function of the ABS system.
If one of the above occurs, have the sys-

tem inspected by your SUZUKI dealer.

If the ABS becomes inoperative, the brake

system will function as an ordinary brake

system that does not have this ABS sys-

tem.
For details of ABS system, refer to “Anti-

lock brake system (ABS)” in the “OPERAT-

ING YOUR VEHICLE” section.

ESP

®

 warning light (if equipped)

52KM133

ESP

®

 is a registered trademark of Daimler

AG.

This light blinks 5 times per second when

one of the following systems is activated.

• Stability control system

• Traction control system

• Hill descent control system (if equipped)

• Grip control system (if equipped)

If this light blinks, drive carefully.

When the ignition switch is turned to “ON”

position or the engine switch is pressed to

change the ignition mode to ON, the light

comes on briefly so you can check that the

light is working. If the light stays on or

comes on when driving, there may be

something wrong with the ESP

®

 systems

(other than ABS). You should have the

system inspected by a SUZUKI dealer.

For details of the ESP

®

 systems, refer to

“Electronic stability program (ESP

®

)” in the

“OPERATING YOUR VEHICLE” section.

WARNING

The ESP

®

 systems cannot prevent

accidents. Always drive carefully.

Summary of Contents for IGNIS 2022 Series



























































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands