3-8 ENGINE
ENGINE REINSTALLATION
NOTE:
The bolt
4
of the spare parts is applied with a thread lock agent. If
reusing a removed bolt
4
, apply a small quantity of the THREAD LOCK
“1342” to its threads.
Reinstall the engine in the reverse order of engine removal.
• Insert the two long bolts from left side. Install the brackets, spacer, bolts and nuts properly, as shown in the
following illustration.
NOTE:
The engine mounting nuts are self-locking. Once the nut has been removed, it is no longer of any use. Be sure
to use new nuts and tighten them to the specified torque.
LENGTH
Bolt
1
35 mm
Bolt
2
35 mm
Bolt
3
33 mm
Bolt
4
55 mm
Bolt
5
180 mm
Bolt
6
140 mm
Bolt
7
50 mm
Bolt
8
30 mm
Bolt
9
75 mm
Bolt
0
25 mm
Spacer
RH
A
27 mm
ITEM
N.m
kgf-m
1
,
2
3
,
8
50
5.0
4
,
9
55
5.5
5
85
8.5
6
88
8.8
7
,
0
23
2.3
#
Summary of Contents for GSX1200 1999
