Suzuki AVB413D, Owner'S Manual & Service Booklet

Page: 48 / 340

2-27
BEFORE DRIVING
79MH0-74E
Installation with a Lap Belt
60G132A
Install your child restraint system accord-
ing to the instructions provided by the child
restraint system manufacturer.
To lengthen or tighten the belt, refer to the
“
Lap-belt ” item in this “Seat Belts and
Child Restraint Systems” section. After
making sure that the seat belt is securely
latched, try moving the child restraint sys-
tem in all directions, to make sure it is
securely installed. If you need to tighten
the belt, pull the free end of the webbing.
Installation with ISOFIX type
Anchorages
79MH0240
Your vehicle is equipped with the lower
anchorages in the rear seat outboard seat-
ing positions for securing a ISOFIX type of
child restraints with the connecting bars.
The lower anchorages are located where
the rear of the seat cushion meets the bot-
tom of the seatback.
Install the ISOFIX type child restraint sys-
tem according to the instructions provided
by the child restraint system manufacturer.
After installing, try moving the child
restraint system in all directions especially
forward to make sure the connecting bars
are securely latched to the anchorages.
79MS00216
Be sure to use the top strap of the child
restraint according to the instructions pro-
vided by the child restraint system manu-
facturer.
Here is a general instruction:
1) Raise the head restraint (if equipped) to
the most upper position.
EXAMPLE
Pull to tighten
WARNING
Be sure to install the ISOFIX type of
child restraint(s) in the only outboard
seating positions, not in the central
position for rear seat.
EXAMPLE
NOTICE
Before installing a child restraint sys-
tem in the rear seat, raise the head
restraint (if equipped) to the most
upper position.
EXAMPLE