Suzuki AVB413D, Owner'S Manual & Service Booklet

Page: 64 / 340

2-43
BEFORE DRIVING
79MH0-74E
Transaxle selector position indica-
tor (for automatic transaxle vehi-
cles) / Gearshift Indicator
(if equipped)
68LM260
Transaxle selector position indicator
When the ignition switch is in the “ON”
position or the ignition mode is “ON”, the
display (B) indicates the gear position (b).
For details on how to use the transaxle,
refer to “Using the Transaxle” in the
“OPERATING YOUR VEHICLE” section.
Gearshift indicator
Refer to “Gearshift Indicator” in the
“OPERATING YOUR VEHICLE” section.
Trip meter / Instantaneous fuel con-
sumption/ Average fuel consumption/
Driving range
When the ignition switch is in the “ON”
position or the ignition mode is “ON”, the
display (C) shows one of the following five
indications, trip meter A, trip meter B,
Instantaneous fuel consumption, Average
fuel consumption or Driving range.
To switch the display indication (C), push
the trip meter selector knob (2) or the indi-
cator selector knob (3) quickly.
79MH0230
(c) Trip meter A
(d) Trip meter B
(e) Instantaneous Fuel Consumption
(f) Average fuel consumption
(g) Driving range
NOTE:
• Indications will change when you push
and release a knob.
• The display shows estimated values.
Indications may not be the same as
actual values.
Trip meter
The trip meter can be used to measure the
distance traveled on short trips or between
fuel stops.
You can use the trip meter A or trip meter B
independently.
To reset the trip meter to zero, push and hold
the trip meter selector knob (2) for a while
when the display shows the trip meter.
( b ) EXAMPLE
(c)
(d)
(e)
(f)
(g)
EXAMPLE
Push the trip meter selector
knob (2).
Push the indicator selector
knob (3).
WARNING
If you attempt to adjust the display
while driving, you could lose control
of the vehicle.
Do not attempt to adjust the display
while driving.