Suzuki AVB413D, Owner'S Manual & Service Booklet

Page: 232 / 340

7-9
INSPECTION AND MAINTENANCE
79MH0-74E
5) Reinstall the drain plug and gasket.
Tighten the plug with a wrench to the
specified torque.
Replace the Oil Filter
(For Petrol Engine Model)
1) Using an oil filter wrench, turn the oil fil-
ter counterclockwise and remove it.
2) Using a clean rag, wipe off the mount-
ing surface on the engine where the
new filter will be seated.
3) Smear a little engine oil around the rub-
ber gasket of the new oil filter.
4) Screw on the new filter by hand until the
filter gasket contacts the mounting sur-
face.
54G092
(1) Loosen
(2) Tighten
Tightening (viewed from filter top)
54G093
(1) Oil filter
(2) 3/4 turn
5) Tighten the filter specified turn from the
point of contact with the mounting sur-
face (or to the specified torque) using
an oil filter wrench.
Tightening torque for oil filter
3/4 turn or
Petrol engine:
14 Nm (1.4 kg-m, 10.3 lb-ft)
WARNING
• New and used oil can be hazard-
ous. Children and pets may be
harmed by swallowing new or used
oil. Keep new and used oil and
used oil filters away from children
and pets.
• Repeated, prolonged contact with
used engine oil may cause skin
cancer.
• Brief contact with used oil may irri-
tate skin.
• To minimize your exposure to used
oil, wear a long-sleeve shirt and
moisture-proof gloves (such as
dish-washing gloves) when chang-
ing oil. If oil contacts your skin,
wash thoroughly with soap and
water.
• Launder any clothing or rags if wet
with oil.
• Recycle or properly dispose of
used oil and filters.
(1)
(2)
EXAMPLE
NOTICE
To tighten the oil filter properly, it is
Important to accurately identify the
position at which the filter gasket
first contacts the mounting surface.
(1)
(2)
EXAMPLE