Suzuki AVB413D, Owner'S Manual & Service Booklet

Page: 69 / 340

2-48
BEFORE DRIVING
79MH0-74E
Automatic door locking function “ ”
• : Disable the automatic door
locking function
• : Lock all doors when the vehi-
cle speed reaches 15 km/h
(default setting)
• : (For automatic transaxle vehi-
cle)
Lock all door when the gear-
shift lever is in other than “P”
Automatic door unlocking
function “
”
• : Disable the automatic door
unlocking function
(default setting of vehicle with
keyless push start system)
• : (For automatic transaxle vehi-
cle)
Unlock all doors when the
gearshift lever is moved to the
“P” from other position
• : (Vehicle with keyless entry
system)
Unlock all doors when the key
is pulled out from the ignition
switch (default setting of vehi-
cle with keyless entry)
(Vehicle with keyless push
start system)
Unlock all doors when the
ignition mode is “LOCK”
(OFF)
Door locking and unlocking
siren “
”
• : Siren sounds when the
door(s) is(are) locked or
unlocked by using the key-
less entry system transmitter,
keyless push start system
remote controller or request
switch (default setting)
• : Siren does not sound when
the door(s) is(are) locked or
unlocked by using the key-
less entry system transmitter,
keyless push start system
remote controller or request
switch
Footwell light setting “ ”
• : Footwell light comes on when
any of doors is open or head-
lights are on
• : Footwell light comes on when
any of doors is open
(default setting)
• : Disable the footwell light
Additional flashes
of the turn signal “
”
• : Turn signal flashes three
times after the turn signal
lever is returned
(default setting)
• : Disable the additional flashes
of turn signal
Shock sensor “ ”
• : Enable the shock sensor
• : Disable the shock sensor
(default setting)
Pre-warning sensitivity of
the shock sensor “
”
• : Disable the pre-warning
• to :
Adjust the pre-warning sensi-
tivity of shock sensor (Lowest
sensitivity level is L01 and
highest is L15, and default
setting is L14)
Full blast warning sensitivity
of the shock sensor “
”
• : Disable the full blast warning
• to :
Adjust the full blast warning
sensitivity of shock sensor
(Lowest sensitivity level is L01
and highest is L15, and
default setting is L09)
Initialization setting “ ”
• : Initialize all settings