VZ800L0 (’10-MODEL) 11
• Remove the oil seal stopper ring
8
.
• Remove the oil seal
9
with the special tool.
09913-50121: Oil seal remover
• Remove the oil seal retainer
0
.
INSPECTION
INNER AND OUTER TUBES
• Inspect the inner tube outer surface and outer tube inner sur-
face for scratches.
• Inspect the “ANTI-FRICTION” metal surfaces for scratches.
• If any defects are found, replace them with a new one.
FORK SPRING
Measure the fork spring free length.
If it is shorter than the service limit, replace it with a new one.
Front fork spring free length:
Service Limit: 374 mm (14.7 in)
The removed oil seal must be replaced with a new one.
Do not remove the “ANTI-FRICTION” metal
A
and
B
.
Upper side
Lower side
Summary of Contents for 2010 VZ800L0
Page 1: ......
Page 41: ...Prepared by August 2009 Part No 99501 38110 01E Printed in Japan 40...
Page 42: ......
