Suzuki 2010 VZ800L0, Supplementary Service Manual

Page: 13 / 42

12 VZ800L0 (’10-MODEL)
DAMPER ROD
Move the inner rod by hand to examine it for smoothness.
If any defects are found, replace inner rod/damper rod (car-
tridge) with a new one.
REASSEMBLY AND REMOUNTING
Reassemble and remount the front fork in the reverse order of
removal and disassembly. Pay attention to the following points:
OIL SEAL AND DUST SEAL
• Install the dust seal, oil seal stopper ring, oil seal and oil seal
retainer onto the inner tube.
1
Dust seal
2
Oil seal stopper ring
3
Oil seal
4
Oil seal retainer

• Insert the inner tube into the outer tube and fit the oil seal and
dust seal with the special tool.

09940-52861: Front fork oil seal installer set
NOTE:
Stamped mark on the oil seal should face outside.
* When installing the oil seal to outer tube, be careful
not to damage the oil seal lip.
* Do not use solvents for washing to prevent oil seal
damage.
* Apply fork oil to the Anti-friction metals and lip of the
oil seal.
* Make sure that the oil seal stopper ring has been fit-
ted securely.