Suzuki 2010 VZ800L0, Supplementary Service Manual

Page: 26 / 42

VZ800L0 (’10-MODEL) 25
CABLE ROUTING
*1 Pass the cable(s) into the guide. *6
Position the white tape of the clutch cable on
the dent of the frame.
*2
When clamping, locate clutch cable so that its
white tape comes closely adjacent to throttle
cable bracket.
*7
Bring clutch cable into contact with cushion and
clamp it on the rear side of cushion.
*3
Be careful not to contact the stopper of clamp
and left side cover.
*8
Clamp in this direction. Also, put the excess
end of the clamp inside of the seat rail.
*4 Clamp in this direction. *9
Adjust the clutch cable play using the engine
side adjuster with the thread part of lever side
adjuster 3 – 5 mm (0.19 – 0.20 in) left.
*5 Clamp the clutch cable inside of the bar.
*1
Throttle cable clip
170 mm
(6.7 in)
*2
UP
Outside
*6
*7
*4
*4
PAIR control
solenoid valve
lead wire
UP Fuel tank cushion
Outside
High tension code
Clutch cable
Clutch cable
Fuel tank
cushion
bar (RH)
Clutch cable
*3
*4
UP
Inside
*5
Fuel tank cushion
bar (RH)
Throttle cable No.2
Throttle cable
No.1
*8
Clutch cable
Throttle cable
0 – 1 mm
(0.00 – 0.04 in)
*1
*9
0 – 1 mm
(0.00 – 0.04 in)
4.5 N.m
0.45 kgf-m
3.5 lbf-ft
( )
Clutch cable