VZ800L0 (’10-MODEL) 13
DAMPER ROD BOLT
• Insert the inner rod/damper rod (cartridge) into the inner tube
with the gasket
1
fitted, apply the damper rod bolt
2
.
• Apply THREAD LOCK to the damper rod bolt.
99000-32110: THREAD LOCK SUPER “1322”
or equivalent
• Tighten the damper rod bolt to the specified torque.
NOTE:
If the damper rod rotates, an action should be taken to prevent it
from rotating. (
Page 10)
Damper rod bolt: 23 N·m (2.3 kgf-m, 16.5 lbf-ft)
FORK OIL
• Place the front fork vertically without spring.
• Compress it fully.
• Pour specified front fork oil up to the top level of the outer
tube.
Capacity (each leg): 541 ml (18.3/19.0 US/lmp oz)
99000-99044-L01: SUZUKI FORK OIL L01
or an equivalent fork oil
• Move the inner rod slowly with the special tool ten times and
more until no more bubbles come out from the oil.
09940-52841: Front fork Inner rod holder
NOTE:
Refill front fork oil up to the top of the outer tube so that bubbles
are visible while bleeding air.
Replace the gasket with a new one.
Summary of Contents for 2010 VZ800L0
Page 1: ......
Page 41: ...Prepared by August 2009 Part No 99501 38110 01E Printed in Japan 40...
Page 42: ......
