8 Operation
8.5.3 Oil vapor sensor setting
Basic setting
Altitude:
Enter the altitude level. Default value is 0.
User slope:
To correct the oil content by a factor, enable
the user slope.
Compressor oil:
Select the oil type.
Output unit:
Select the unit of the oil content.
Analog output
Set the scaling of the analog output (4 ... 20 mA).
Modbus setting
Set the Modbus communication settings such as address,
baud-rate and parity.
Alarm setting
Enable or disable the alarm function and set the alarm
threshold.
Status
Shows the PID sensor lifetime, valid calibration time,
remaining filter capacity (The filter is consumable
component used for auto zero calibration.), gas
temperature, and pressure. An indication is given at each
line about whether the value is normal or not.
23