Surefire BMS-350, Installation And Operation Manual, Page: 24 / 56

24
CONTROLLER SETUP
Auxiliary (AUX)
Primary Function:

The AUX button displays the current ohms / resistance on the igniter
Secondary Function:

The AUX button displays the following information: System Days On, Main Burner Hours On, Ignition
Attempts, and Successful Ignitions.

To view the above information, follow these steps:
1. Press and hold the AUX button and press the up arrow button once provides the number of days the
system has been in operation.
2. Press and hold the AUX button and pressing the up arrow button twice provides the number of days
the main burner has been burning.
3. Press and hold the AUX button and pressing the up arrow button three times provides the number
of ignition attempts.
4. Press and hold the AUX button and pressing the up arrow button four times provides the number of
successful ignitions.
Solenoid Timing

The Solenoid Timing button displays the current timing between the first stage solenoid opening and the
second stage solenoid opening.

To set or change the solenoid timing, follow these steps:
1. Press the Solenoid Timing button to view the current timing.
2. Unlock the system by pressing and holding the up arrow button for 5 seconds until a series of zeros
appear.
3. Press and hold the Solenoid Timing button and use the up and down arrow buttons to select desired
timing.
NOTE: Solenoid Timing factory setting: 30 seconds.
Solenoid Timing range: 5 — 60 seconds