Supero X7DWU, User Manual

Page: 65 / 118

Chapter 4: BIOS
4-11
X
Slot1 PCI-Exp. <R> x8, Slot2 PCI-Exp.<R> x4, Slot3 PCI-Exp.
<R> x4, Slot4 PCI-Exp. <R> x4, Slot5 PCI-Exp. <L> x8, Slot6 PCI-
Exp. <L> x4 and Slot0 PCI-Exp. <L> x4
Access the submenu for each of the settings above to make changes to the fol-
lowing:
Option ROM Scan
When enabled, this setting will initialize the device expansion ROM. The options
are Enabled and Disabled.
Enable Master
This setting allows you to enable the selected device as the PCI bus master. The
options are Enabled and Disabled.
Latency Timer
This setting allows you to set the clock rate for Bus Master. A high-priority, high-
throughout device may benefi t from a greater clock rate. The options are Default ,
0020h, 0040h, 0060h, 0080h, 00A0h, 00C0h, and 00E0h. For Unix, Novell and
other Operating Systems, please select the option: other. If a drive fails after the
installation of a new software, you might want to change this setting and try again.
A different OS requires a different Bus Master clock rate.
Large Disk Access Mode
This setting determines how large hard drives are to be accessed. The options are
DOS or Other (for Unix, Novelle NetWare and other operating systems).