Supero X7DWU, User Manual

Page: 108 / 118

C-14
X7DWU User's Manual
Rebuilding Arrays
Note 1: Rebuilding applies to Fault Tolerant array (RAID 1) only.
If an array Build process is interrupted or when one critical member is missing,
you must perform a Rebuild to restore its functionality. For a critical array rebuild
operation, the optimal drive is the source drive.
Note 2: If no spare array exists and a hard disk drive fails, you need to create
a spare before you can rebuild an array.
To Rebuild an array
From the Main Menu, select Manage Arrays (as shown in the screen below). 1.
From the List of Arrays, select the array you want to Rebuild.
Press <Ctrl> and <R> to Rebuild. 2.