C-12
X7DWU User's Manual
Adding/Deleting Hotspares
To add a Hotspare
Note
: In order to rebuild a RAID (RAID 0 or RAID 1), you would need to add
a new HDD as a hotspare.
From the main menu (shown on Page C-4), select Add/Delete Hotspares.
1.
Use the up and down arrow keys to highlight and select the disk you want to
2.
designate as a hotspare, and press <Insert>, and then, press <Enter>.
Press Yes when the following prompt is displayed: "Do you want to create
3.
spare?" (Yes/No?)
The spare you have selected will appear in the Selected drives Menu.
4.
To delete a Hotspare
From the main menu (shown on Page C-4), select Add/Delete Hotspares.
1.
Use the up and down arrow keys to highlight and select the Hotspare you want
2.
to delete, and press <delete>, and then, press <Enter>.
When the following warning is displayed: "Do you want to delete the hot spare?"
3.
(Yes/No?), press
Yes
to delete the hotspare you have selected.
Summary of Contents for X7DWU
