Supero X7DWU, User Manual

Page: 114 / 118

C-20
X7DWU User's Manual
C-2 Installation Intel's ESB2 Driver by Adaptec and the
Operation System
Insert Supermicro's bootable CD that came with the package into the CD Drive 1.
during the system reboot, and the screen: "Supermicro Driver Diskette Maker"
will appear.
Choose from the list the item: "Intel ESB2 Driver by 3rd Party (Adaptec)" and 2.
press <ENTER>.
From the next screen displayed, choose the OS driver you want to install and 3.
press <Enter>.
Insert a formatted diskette into drive A: and press <Enter> as prompted. 4.
Exit the program after the process is completed. Then, reboot the system. 5.
Insert the Microsoft Windows OS Setup CD in the CD Driver, and the system 6.
will start to boot up from CD.
Press the <F6> key when the message-"Press F6 if you need to install a third 7.
party SCSI or RAID driver" displays.
When the Windows OS Setup screen appears, press "S" to specify additional 8.
device(s).
Insert the driver diskette-"Adaptec Embedded Serial ATA Raid Controller Driver" 9.
into Drive A: and press the <Enter> key.
Choose the Adaptec Embedded Host Serial ATA Raid Controller from the list 10.
indicated in the Windows OS Setup Screen, and press the <Enter> key.
Press the <Enter> key to continue the installation process. (If you need to specify 11.
any additional devices to be installed, do it at this time.) Once all devices are
specifi ed, press the <Enter> key to continue with the installation.
From the Windows OS Setup screen, press <Enter>. The OS Setup will 12.
automatically load all device fi les, and, then, continue with the Windows OS
installation.
After Windows OS Installation is completed, the system will automatically 13.
reboot.