Supero SuperWorkstation 7045A-3, User Manual

Page: 74 / 120

7-4
S
UPER
W
ORKSTATION 7045A-3 User's Manual
IDE Channel 0 Master/Slave, SATA Port0, SATA Port1, SATA
Port2, SATA Port3
These settings allow the user to set the parameters of IDE Channel 0 Master/Slave,
SATA Port0, SATA Port1, SATA Port2, SATA Port3 slots. Hit <Enter> to activate
the following sub-menu screen for detailed options of these items. Set the correct
confi gurations accordingly. The items included in the sub-menu are:
Type
Selects the type of IDE hard drive. The options are Auto , (which allows the BIOS
to automatically determine the hard drive's capacity, number of heads, etc.), a
number from 1-39 to select a predetermined type of hard drive, CDROM and
ATAPI Removable. The option "User" will allow the user to enter the parameters
of the HDD installed at this connection. The option "Auto" will allow the BIOS to
automatically confi gure the parameters of the HDD installed at the connection.
Choose the option 1-39 to select a predetermined HDD type. Select CDROM if a
CDROM drive is installed. Select ATAPI if a removable disk drive is installed.