Supero SuperWorkstation 7045A-3, User Manual

Page: 51 / 120

Chapter 5: Advanced Serverboard Setup
5-17
Wake-On-LAN
The Wake-On-LAN header is desig-
nated JWOL. See the table on the
right for pin defi nitions. You must
enable the LAN Wake-Up setting in
BIOS to use this feature. You must
also have a LAN card with a Wake-
on-LAN connector and cable.
Wake-On-Ring
The Wake-On-Ring header is desig-
nated JWOR. This function allows
your computer to receive and "wake-
up" by an incoming call to the modem
when in suspend state. See the table
on the right for pin defi nitions. You
must have a WOR card and cable to
use this feature.
SMB
The System Management Bus header
(for the PCI bus) is located near the
SATA ports. Connect the appropri-
ate cable here to utilize SMB on your
system. See the table on the right for
pin defi nitions.
Wake-On-Ring
Pin Defi nitions
(JWOR)
Pin# Defi nition
1 Ground (Black)
2 Wake-up
Wake-On-LAN Pin
Defi nitions (JWOL)
Pin# Defi nition
1 +5V Standby
2 Ground
3 Wake-up
SMB Power (I
2
C)
The header at J17 is for I
2
C, which
may be used to monitor the status of
the power supply, fan and system tem-
perature. See the table on the right for
pin defi nitions.
SMB Header
Pin Defi nitions (SMB)
Pin# Defi nition
1 Data
2 Ground
3 Clock
4 No Connection
SMB Power (I 2 C)
Pin Defi nitions (J17)
Pin# Defi nition
1 Clock
2 Data
3 Power Fail
4 Ground
5 +3.3V