Supero SuperWorkstation 7045A-3, User Manual

Page: 111 / 120

Appendix C: SAS and Software Installation
C-3
Creating a RAID Array
To create a RAID array, perform the following steps:
1. From the main menu, use the up and down arrow keys to highlight Array Con-
fi guration Utility and press <Enter>. The screen sown in Figure C-3 appears.
2. Use the up and down arrow keys to select Create Array then hit the <Enter> key.
(Selections can also be made by hitting the key of the letter corresponding to the
red letter in the desired item, in the case the <C> key.)
3. The screen shown in Figure C-3 appears. On the left are the SAS drives detected
in your system. Use the up and down arrow keys to highlight the drives you want
to become part of the RAID array and press the <Insert> key to add them to the
array. Repeat until all the drives you want in the array have been selected.
Figure C-3. Array Confi guration Utility Screen