Supero SuperWorkstation 5033C-T, User Manual

Page: 3 / 96

Preface
About This Manual
This manual is written for professional system integrators and PC technicians.
It provides information for the installation and use of the SuperWorkstation 5033C-
T. Installation and maintainance should be performed by experienced techni-
cians only.
The 5033C-T is a high-end, single processor mid-tower workstation based on the
SC733T-350 mid-tower workstation chassis and the Super P4SCT+II
motherboard. The P4SCT+II supports a single Intel
®
Pentium
®
4 HT (hyper-
threading) processor of up to 3.40 GHz with an integrated 512KB advanced
transfer cache or Intel
®
Celeron
®
processors of up to 2.80 GHz with an inte-
grated 128KB advanced transfer cache.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with the
system and describes the main features of the Super P4SCT+II motherboard and
the SC733T-350 chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperWorkstation
5033C-T into a rack and check out the server configuration prior to powering up
the system. If your server was ordered without the processor and memory
components, this chapter will refer you to the appropriate sections of the manual
for their installation.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the
functions and information provided by the control panel on the chassis as
well as other LEDs located throughout the system.
iii
Preface