Supero SuperWorkstation 5033C-T, User Manual

Page: 19 / 96

Chapter 2: System Installation
2-1
Chapter 2
System Installation
2-1 Overview
This chapter provides a quick setup checklist to get your SuperWorkstation
5033C-T up and running. Following the steps in the order given should enable
you to have the system operational within a minimal amount of time. If your
system is not already fully integrated with a motherboard, processor, system
memory etc., please turn to the chapter or section noted in each step for details
on installing specific components.
2-2 Unpacking the SuperWorkstation 5033C-T
You should inspect the box the SuperWorkstation 5033C-T was shipped in and
note if it was damaged in any way. If the server itself shows damage, you should
file a damage claim with the carrier who delivered it.
Decide on a suitable location for setting up and operating the SuperWorkstation
5033C-T. It should be situated in a clean, dust-free area that is well ventilated.
Avoid areas where heat, electrical noise and electromagnetic fields are gener-
ated. You will also need it placed near a grounded power outlet.
Once the SuperWorkstation 5033C-T is placed in the appropriate location, slide
the locking tabs on each caster down to keep it stationary.
! !
Warnings and Precautions!
- Ensure that the caster wheels on the workstation are locked.
- Review the electrical and general safety precautions in Chapter 4.
- Use a regulating uninterruptible power supply (UPS) to protect the server
from power surges, voltage spikes and to keep your system operating in
case of a power failure.
-
Allow the power supply units and hot-swap Serial ATA drive to cool
before touching them.
-
To maintain proper cooling, always keep all chassis panels closed and
all SATA carriers installed when not being serviced.