1-4
SUPERSERVER 8047R-TRF+/7RFT+ USER'S MANUAL
Hard Drive Subsystem
The SC748TQ-R1K43BP chassis was designed to support
fi
ve 3.5" hot-swap SATA
or SAS hard drives in a M35 mobile rack, with an additional
fi
ve 3.5" hard drives
available with a second optional M35 mobile rack installed.
Mobile Rack
The SC748 chassis includes a CSE-M35BP mobile rack. The chassis contians a
space in the front for an additional mobile rack to be installed also. For detailed
speci
fi
c to your mobile rack, information, see the appendices at the back of this
manual.
Peripheral Drives
Each SC748 chassis provides three 5.25” peripheral drive bays for DVD-ROM/
CD-ROM drives, or additional hard drives. One of these drive bays may be used
for a slim
fl
oppy drive.
PCI Expansion Slots
Four PCI expansion card slots are available in the rear of the chassis for two (2)
PCI Express 3.0 x16 slots (Slot3/Slot5) and two (2) PCI Express 3.0 x8 in x 16 slots
(Slot2/Slot4). See our web site for details (
http://www.supermicro.com/products/nfo/
UIO.cfm
). See section 5-6 for further details.)
Front Control Panel
The control panel on the SuperServer 8047R-TRF+/7RFT+ provides you with
system monitoring and control. LEDs indicate system power, HDD activity, network
activity, system overheat and power supply failure. A main power button and a
system reset button are also included. In addition, two USB ports have been
incorporated into the control panel to provide front side USB access.
I/O Backplane
The SC748TQ-R1K43BP 4U chassis contains an I/O backplane that provides four
standard-size add-on card slots, one COM port, a VGA port, four USB 2.0 ports, a
dedicated IPMI LAN port, two gigabit Ethernet ports and a UID switch.
Mounting Rails (optional)
The SC748 can be placed in a rack for secure storage and use. To setup your rack,
follow the step-by-step instructions included in this manual.
