Chapter 2: Server Installation
2-11
2-6 Tower
Confi guration Instructions
The SC748 chassis is shipped with the chassis cover and feet pre-installed. To use
the chassis as a desktop server, no other installation is required.
Use the instructions in this section if you have converted the chassis for rack use
and need to return the chassis to tower mounting.
Installing the Chassis Cover
1. Remove the rack mount ears.
2. Align the cover post with the corresponding holes on the top of the chassis
and place the cover on top of the chassis. The cover should overhang
approximately one-half inch over the front of the chassis (Figure 2-8).
3. Slide the chassis cover toward the rear of the chassis to lock the cover into
place.
Figure 2-8: Adding the Chassis Feet and Top Cover
Add the
Chassis
Feet
Remove
Chassis Rack
Mount Ears
Add the
Chassis Cover
Placing the Chassis Feet (Figure 2-9)
1. Place the chassis foot in the foot receptacle and slide the foot toward the
front of the chassis. The foot should lock into place.
2. Secure the foot to the chassis using one screw enclosed in the packaging.
3. Repeat steps 1 and 2 for the remaining three chassis feet.
