B-1
Appendix B: System Speci
fi
cations
Appendix B
System Specifi cations
Processors
Quad Intel E5-4600 (V2) Series series (Socket R-LGA 2011 type) processors
Note:
In order to install the E5-4600 (V2) Series CPU, you must make sure that BIOS 3.0
version is installed to your system.
Note:
You must install at least two processors for full functions to be supported.
Note:
Please refer to our web site for a complete listing of supported processors.
Chipset
One Intel C602 chipset
BIOS
16 MB SPI AMI BIOS® SM Flash BIOS
Memory Capacity
The X9QRi-F+/X9QR7-TF+ serverboard supports thirty-two (32) 240-pin
DIMM sockets that can support up to 1024GB of Registered (RDIMM),
Load Reduced (LRDIMM) ECC or Unbuffered (UDIMM) ECC/Non-ECC
DDR3 1866/1600/1333/1066/800 MHz speed SDRAM in a two-channel memory bus with
memory sizes of 1GB, 2GB, 4GB, 8GB, 16GB and 32GB size @ 1.35V/1.5V voltages.
Note:
LRDIMM (Reduced Load) memory supports only DDR3 1333/1066/800 MHz speeds.
See the memory section in Chapter 5 for details.
SAS/SATA Controller
Intel C602 on-chip controller for six-port SATA subsystem (two SATA
3.0 and four SATA 2.0 ports), which is either RAID 0 and 1 (SATA3) or
RAID 0, 1, 5, and 10 (SATA2) Windows/LINUX supported. The SATA drives are
hot-swappable units.
A LSI
®
2208 SAS controller is integrated into the X9QR7-TF+ serverboard to provide
an eight port SAS (Serial Attached SCSI) subsystem, which is RAID 0, 1, 5, 6 and 10
supported (8047R-7RFT+ server only). The SAS drives are hot-swappable units.
Drive Bays
Five hot-swap 3.5" drive bays to house up to
fi
ve SATA or SAS drives (additional
fi
ve 3.5" hard drives available with optional M35 mobile rack), and three 5.25"
peripheral drive bays
