Supero SUPERSERVER 6035B-8R+, User Manual

Page: 3 / 110

iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer 6035B-8R+.
Installation and maintainance should be performed by experienced technicians
only.
The SuperServer 6035B-8R+ is a high-end server based on the SC836S2-R800 3U
rackmount chassis and the X7DB8+, a dual processor serverboard that supports
dual Intel ® Xeon TM LGA 771 processors at a Front Side (System) Bus speed of 1333
MHz and up to 64 GB of registered FBD ECC DDR2-667/533 SDRAM.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the X7DB8+ serverboard and the
SC836S2-R800 chassis, which comprise the SuperServer 6035B-8R+.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 6035B-8R+
into a rack and check out the server confi guration prior to powering up the system.
If your server was ordered without processor and memory components, this chapter
will refer you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.