Supero SuperServer 4027GR-TR, User Manual

Page: 72 / 135

5-22
SUPERSERVER 4027GR-TR/TRT USER'S MANUAL
NIC1/NIC2 LED Indicators
The NIC (Network Interface Controller)
LED connection for LAN port 1 is located
on pins 11 and 12 of JF1 and the LED
connection for LAN Port 2. Attach the
NIC LED cables here to display network
activity. Refer to the table on the right for
pin de
fi nitions.
NIC1/2 LED
Pin Defi nitions (JF1)
Pin# De fi nition
9 NIC 2 Act. LED
10 NIC 2 Link LED
11 NIC 1 Act. LED
12 NIC 1 Link LED
Power Fail LED
The Power Fail LED connection is
located on pins 5 and 6 of JF1. Refer to
the table on the right for pin de
fi nitions.
PWR Fail LED
Pin Defi nitions (JF1)
Pin# De fi nition
5 3.3V
6 PWR Supply Fail
Overheat (OH)/Fan Fail/PWR Fail/
UID LED
Connect an LED cable to pins 7 and
8 of Front Control Panel to use the
Overheat/Fan Fail/Power Fail and UID
LED connections. The Red LED on
pin 7 provides warnings of overheat,
fan failure or power failure. The Blue
LED on pin 8 works as the front panel
UID LED indicator. The Red LED takes
precedence over the Blue LED by
default. Refer to the tables on the right
for pin de
fi nitions.
OH/Fan Fail/ PWR Fail/Blue_UID
LED Pin Defi nitions (JF1)
Pin# De fi nition
7 Red_LED-Cathode/OH/Fan Fail/
Power Fail5.5V.SB
8 Blue_UID LED
OH/Fan Fail/PWR Fail
LED Status (Red LED)
State De fi nition
Off Normal
On Overheat
Flashing Fan Fail
Reset Button
The Reset Button connection is located
on pins 3 and 4 of JF1. Attach it to a
hardware reset switch on the computer
case. Refer to the table on the right for
pin de
fi nitions.
Reset Button
Pin Defi nitions (JF1)
Pin# De fi nition
3 Reset
4 Ground