Supero SuperServer 4027GR-TR, User Manual

Page: 100 / 135

Chapter 7: BIOS
7-5
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function. When this
item is set to Enabled, the ROM BIOS of the host adaptors will "capture" Interrupt 19
at bootup and allow the drives that are attached to these host adaptors to function
as bootable disks. If this item is set to Disabled, the ROM BIOS of the host adap-
tors will not capture Interrupt 19, and the drives attached to these adaptors will not
function as bootable devices. The options are
Enabled
and Disabled.
Re-try Boot
Use this item to select the type of the bootable device that the BIOS will continuously
try to boot the system from. The options are
Disabled
, Legacy Boot, and EFI Boot.
Power Confi guration
Watch Dog Function
If enabled, the Watch Dog timer will allow the system to automatically reboot when
a non-recoverable error occurs that lasts for more than
fi ve minutes. The options
are Enabled and
Disabled.
Power Button Function
If this feature is set to Instant Off, the system will power off immediately as soon
as the user presses the power button. If this feature is set to 4 Seconds Override,
the system will power off when the user presses the power button for 4 seconds or
longer. The options are
Instant Off
and 4 Seconds Override.
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Stay Off for the
system power to remain off after a power loss. Select Power On for the system
power to be turned on after a power loss. Select Last State to allow the system
to resume its last state before a power loss. The options are Power On, Stay Off,
and
Last State
.

CPU Confi guration
This submenu displays the CPU information as detected by the BIOS. It also allows
the user to con
fi gure CPU settings.

Socket 1 CPU Information/Socket 2 CPU Information
This submenu displays the following information regarding the CPU installed in
Socket 1 or Socket 2.
•
Type of CPU