Supero SuperServer 4027GR-TR, User Manual

Page: 111 / 135

7-16
SUPERSERVER 4027GR-TR/TRT USER'S MANUAL
an active state when I/O activity resumes. The options are
Enabled
and
Disabled.
Port 0~5 Hot Plug
Select Enabled to enable hot-plugging support for a particular port, which will
allow the user to change a hardware component or device without shutting
down the system. The options are
Enabled
and Disabled.
Port 0~5 Staggered Spin Up
Select Enabled to enable Staggered Spin-up support to prevent excessive
power consumption caused by spinning-up of multiple devices simultane-
ously. The options are Enabled and
Disabled
.
RAID Mode
The following items are displayed when RAID Mode is selected:
SATA RAID Option ROM/UEFI Driver
Use this feature to enable the onboard SATA Option ROM or EFI driver. The
options are
Enabled
and Disabled.
Port 0~5 Hot Plug
Select Enabled to enable hot-plugging support for the particular port which
will allow the user to replace a device without shutting down the system.
The options are Disabled and
Enabled
.

SCU (Storage Control Unit) Confi guration
Storage Controller Unit
Select Enabled to support SCU storage devices. The options are Disabled and
Enabled
.
SCU RAID Option ROM/UEFI Driver
Select Enabled to support the onboard SCU Option ROM to boot up the system via
a storage device or from the UEFI driver. The options are Disabled and
Enabled
.
SCU Port 0-SCU Port 3
: The AMI BIOS will automatically detect the onboard SCU
devices and display the status of each SCU device as detected.