Supero SUPERSERVER 2027TR-D70RF+, User Manual

Page: 84 / 144

6-2
SUPERSERVER 2027TR-D70RF+ USER'S MANUAL
Figure 6-2. Chassis Rear View
Figure 6-1. Chassis Front View
USB Ports
VGA Port
Power
Supply
Hard Drives
Node A Control Panel Node B Control Panel
LAN Ports
6-2 Control Panel
Each control panel on the front of the chassis must be connected to the JF2
connector on its associated serverboard to provide you with system control buttons
and status indicators.
These wires have been bundled together in a ribbon cable to simplify the connection.
Connect the cable from JF2 on the serverboard to the control panel PCB (printed
circuit board). Make sure the red wire plugs into pin 1 on both connectors. Pull all
excess cabling out of the airfl ow path. The LEDs inform you of system status for
the serverboard it is connected to. See Chapter 3 for details on the LEDs and the
control panel buttons.