Supero SUPERSERVER 2027TR-D70RF+, User Manual

Page: 108 / 144

7-4
SUPERSERVER 2027TR-D70RF+ USER'S MANUAL
AddOn ROM Display Mode
This item sets the display mode for the Option ROM. Select Keep Current to use
the current AddOn ROM Display setting. Select Force BIOS to use the Option
ROM display mode set by the system BIOS. The options are Force BIOS and
Keep Current.
Bootup Num-Lock
This feature sets the Power-on state for the Numlock key. The options are Off
and On .
Wait For 'F1' If Error
Select Enabled to force the system to wait until the 'F1' key is pressed if an error
occurs. The options are Disabled and Enabled .
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function. When this
item is set to Enabled, the ROM BIOS of the host adaptors will "capture" Interrupt 19
at bootup and allow the drives that are attached to these host adaptors to function as
bootable disks. If this item is set to Disabled, the ROM BIOS of the host adaptors will
not capture Interrupt 19, and the drives attached to these adaptors will not function
as bootable devices. The options are Enabled and Disabled.
Re-try Boot
When set to Enabled, the BIOS will continuously retry to boot from the selected
boot type. The options are Disabled , Legacy Boot, and EFI Boot.
Watch Dog Function
If enabled, the Watch Dog timer will allow the system to reboot when it is inactive
for more than 5 minutes. The options are Enabled and Disabled.
Power Button Function
If this feature is set to Instant_Off, the system will power off immediately as soon
as the user presses the power button. If this feature is set to 4_Second_Override,
the system will power off when the user presses the power button for 4 seconds or
longer. The options are Instant_Off and 4_Second_Override.
Restore on AC Power Loss
This feature sets the power state after a power outage. Select Power-Off for the
system power to remain off after a power loss. Select Power-On for the system
power to be turned on after a power loss. Select Last State to allow the system
to resume its last state before a power loss. The options are Power-On, Stay-Off
and Last State .