Supero SUPERSERVER 2027TR-D70RF+, User Manual

Page: 133 / 144

Chapter 7: BIOS
7-29
Custom EFI Logging Options
Log EFI Status Codes
Select Enabled to log EFI (Extensible Firmware Interface) Status Codes, Error
Codes or Progress Codes. The options are Enabled and Disabled.
Note : After making changes on a setting, be sure to reboot the system for
the changes to take effect.
X
BMC Network Confi guration
LAN Channel 1 : This feature allows the user to confi gure the settings for LAN1 Port.
Update IPMI LAN Confi guration
This feature allows the BIOS to implement any IP/MAC address changes at the next
system boot. If the option is set to Yes, any changes made to the settings below will
take effect when the system is rebooted. The options are No and Yes.
Confi guration Address Source
This feature allows the user to select the source of the IP address for this computer.
If Static is selected, you will need to know the IP address of this computer and enter
it to the system manually in the fi eld. If DHCP is selected, the BIOS will search for a
DHCP (Dynamic Host Confi guration Protocol) server in the network that is attached
to and request the next available IP address for this computer. The options are
DHCP and Static. The following items are assigned IP addresses automatically if
DHCP is selected, or can be confi gured manually if Static is selected.
Station IP Address
This item displays the Station IP address for this computer. This should be in decimal
and in dotted quad form (i.e., 192.168.10.253).
Subnet Mask
This item displays the sub-network that this computer belongs to. The value of each
three-digit number separated by dots should not exceed 255.
Station MAC Address
This item displays the Station MAC address for this computer. Mac addresses are
6 two-digit hexadecimal numbers.
Gateway IP Address
This item displays the Gateway IP address for this computer. This should be in
decimal and in dotted quad form (i.e., 192.168.10.253).