Supero SUPERSERVER 2027TR-D70RF+, User Manual

Page: 12 / 144

1-2
SUPERSERVER 2027TR-D70RF+ USER'S MANUAL
1-2 Serverboard Features
A t t h e h e a r t o f t h e 2 0 2 7 T R - D 7 0 R F + s e r v e r l i e s t h e
X 9 D R T- H F + , a d u a l p r o c e s s o r s e r v e r b o a r d b a s e d o n t h e I n t e l
®
C602 chipset and designed to provide maximum performance. Two of these
serverboards can be mounted in the SC217HD-R1K28MB chassis.
The sections below cover the main features of the X9DRT-HF+ serverboard (see
Figure 1-1 for a block diagram of the chipset).
Processors
The X9DRT-HF+ supports single or dual Intel Xeon
®
E5-2600 series processors
(Socket R LGA 2011). Please refer to the serverboard description pages on our
web site for a complete listing of supported processors ( www.supermicro.com ).
Memory
The X9DRT-HF+ has sixteen (16) DIMM slots supporting up to 512 GB of
DDR3-1600/1333/1066/800 MHz speed registered ECC SDRAM in up to
512 MB, 1 GB, 2 GB, 4 GB, 8 GB, 16 GB or 32 GB sizes at 1.35V or 1.5V
voltages. See Chapter 5 for details.
Note: Check the Supermicro website ( www.supermicro.com ) for the latest memory
support information.
SAS/SATA
An LSI
®
SAS2008 SAS2 controller is integrated into the installed BPN-ADP-E16-L
adapter cards to provide a twelve port 6 Gb/s SAS2 (Serial Attached SCSI) /SATA3
subsystem for each node. The system has either RAID 0, 1 and 10 support for the
SuperServer 2027TR-D70RF+ server. The SAS/SATA drives are hot-swappable
units.
Note: The operating system you use must have RAID support to enable the
hotswap capability and RAID function of the SAS/SATA drives.
PCI Expansion Slots
The SuperServer 2027TR-D70RF+ has for each node one (1) available PCI-E 3.0
x8 Slot for SMC-Proprietary Micro LP Card (CPU1 Slot2) that can be used.