Supero SUPERSERVER 2027TR-D70RF+, User Manual

Page: 13 / 144

1-3
Chapter 1: Introduction
Onboard Controllers/Ports
The color-coded I/O ports include a VGA (monitor) port, two USB 2.0 ports (an
additional internal USB header and one Type A USB connector are included on the
serverboard), an IPMI 2.0 dedicated LAN port and two Ethernet ports.
Note: For IPMI Confi guration Instructions, please refer to the Embedded BMC
Confi guration User's Guide available @ http://www.supermicro.com/support/
manuals / for IPMI 2.0 system.
Graphics Controller
The X9DRT-HF+ features an integrated Matrox ® G200eW Video Controller.
Other Features
Other onboard features that promote system health include onboard voltage
monitors, a chassis intrusion header, auto-switching voltage regulators, chassis and
CPU overheat sensors, virus protection, node manager software and BIOS rescue.
1-3 Server Chassis Features
The following is a general outline of the main features of the SC217HD server
chassis.
System Power
Each SC217HD chassis model includes a high-effi ciency 80-plus Platinum certifi ed
power supply, rated at 1280 Watts plus one redundant backup power supply.
In the unlikely event your power supply fails, replacement is simple and can be
accomplished without tools.
SAS/SATA Subsystem
The SC217HD supports up to twenty-four (24) 2.5" hot-swap SAS/SATA drives in
trays (12 for each node). These drives are hot-swappable units and are connected
to a backplane that provides power and control.
Note: The operating system you use must have RAID support to enable the hot-
swap capability of the drives.