Supero SUPERSERVER 2026T-6RF+, User Manual

Page: 68 / 126

5-18
S
UPER
S
ERVER 2026T-6RFT+/2026T-6F+ User's Manual
Fan Headers
The board has eight fan headers
designated Fan1 through Fan8. FAN1
through FAN6 are for chassis/system
fans while FAN7 and FAN8 are used
for CPU heatsink fans. Their speed is
controlled via Thermal Management
with a BIOS setting. See the table on
the right for pin de
fi nitions.
Fan Header
Pin Defi nitions
Pin# De fi nition
1 Ground (Black)
2 +12V (Red)
3 Tachometer
4 PWM Control
Universal Serial Bus Ports
Two Universal Serial Bus ports are
located on the I/O backplane. USB0
is the bottom connector and USB1
is the top connector. USB4/5/7 are
headers provided for front panel ac-
cess (cables not included) and USB6
is a Type A port (see board layout for
locations). See the table on the right
for pin de
fi nitions.
Front Panel USB
Pin Defi nitions
USB 2/3
Pin # De
fi nition
USB 4/5
Pin # De
fi nition
1 +5V 1 +5V
2 PO- 2 PO-
3 PO+ 3 PO+
4 Ground 4 Ground
5 Key 5 NC
(NC= No connection)
USB Ports
(USB0/1/6)
Pin# De fi nition
1 +5V
2 PO-
3 PO+
4 Ground
5 NA
Internal USB
Pin Defi nitions (USB 7)
Pin # De fi ni-
tion
Pin # De fi ni-
tion
1 PWR 2 Ground
3 USBD- 4 Ground
5 USBD+ 6 Ground
7 Ground 8 Ground
9 NA 10 Ground
Serial Ports
The COM1 serial port is located on
the I/O backplane. COM2 is a header
on the serverboard (see serverboard
layout for location). See the table on
the right for pin de
fi nitions.
Note:
Pin 10 is included on the header but not on
the port. NC indicates no connection.
Serial Port Pin Defi nitions
Pin # De fi nition Pin # De fi nition
1 DCD 6 DSR
2 RXD 7 RTS
3 TXD 8 CTS
4 DTR 9 RI
5 Ground 10 NC