Supero SUPERSERVER 2026T-6RF+, User Manual

Page: 107 / 126

Chapter 7: BIOS
7-17
to keep Console Redirection active during POST and Boot Loader. The options
are Disabled, Boot Loader, and
Always
.
Terminal Type
This feature allows the user to select the target terminal type for Console Redirec-
tion. The options are
ANSI,
VT100
, and VT-UTF8.
VT-UTF8 Combo Key Support
A terminal keyboard de fi nition that provides a way to send commands from a remote
console. Available options are
Enabled
and Disabled.
Sredir Memory Display Delay
This feature de fi nes the length of time in seconds to display memory information.
The options are
No Delay,
Delay 1 Sec, Delay 2 Sec, and Delay 4 Sec.

Hardware Health
Monitor
This feature allows the user to monitor system health and review the status of each
item as displayed.
CPU Overheat Alarm
This option allows the user to select the CPU Overheat Alarm setting which de-
termines when the CPU OH alarm will be activated to provide warning of possible
CPU overheat.
Warning!
1.Any temperature that exceeds the CPU threshold tempera-
ture prede fi ned by the CPU manufacturer may result in CPU overheat or
system instability. When the CPU temperature reaches this prede fi ned
threshold, the CPU and system cooling fans will run at full speed. 2. To
avoid possible system overheating, please be sure to provide adequate
air
fl ow to your system.
The options are:
•
The Early Alarm: Select this setting if you want the CPU overheat alarm (includ-
ing the LED and the buzzer) to be triggered as soon as the CPU temperature
reaches the CPU overheat threshold as prede
fi ned by the CPU manufacturer.
•
The Default Alarm
: Select this setting if you want the CPU overheat alarm
(including the LED and the buzzer) to be triggered when the CPU temperature
reaches about 5
o C above the threshold temperature as prede fi ned by the CPU
manufacturer to give the CPU and system fans additional time needed for CPU
and system cooling. In both the alarms above, please take immediate action
as shown below.