Supero SUPERSERVER 2026T-6RF+, User Manual

Page: 59 / 126

Chapter 5: Advanced Serverboard Setup
5-9
Memory Support for 5500 Processor(s)
RDIMM Population w/5500 Processors Installed
DIMM
Slots per
Channel DIMMs
Populated
per Channel DIMM Type (Reg.=
Registered) Speeds (in MHz) Ranks per DIMM
(any combination;
SR=Single Rank,
DR=Dual Rank,
QR=Quad Rank)
3 1 Reg. DDR3 ECC 800,1066,1333 SR or DR
3 1 Reg. DDR3 ECC 800,1066 QR
3 2 Reg. DDR3 ECC 800,1066 Mixing SR, DR
3 2 Reg. DDR3 ECC 800
(Note)
Mixing SR, DR, QR
3 3 Reg. DDR3 ECC 800
(Note )
Mixing SR, DR
Note:
1066 RDIMMs will run at 800 MHz (-BIOS automatic downgrading)
Memory Population for Optimal Performance With One CPU (CPU1) Installed
P1-DIMMs To Populate P1-DIMMs
Branch 0 Branch 1 Branch 2
3 DIMMs P1-1A P1-2A P1-3A
6 DIMMs P1-1A P1-1B P1-2A P1-2B P1-3A P1-3B
9 DIMMs
(RDIMMs only) (
Note
)
P1-1A P1-1B P1-1C P1-2A P1-2B P1-2C P1-3A P1-3B P1-3C
Note
: Max. of 6 UDIMM modules are supported by a CPU.
Memory Population for Optimal Performance With One CPU (CPU2) Installed
P2-DIMMs To Populate P2-DIMMs
Branch 0 Branch 1 Branch 2
3 DIMMs P2-1A P2-2A P2-3A
6 DIMMs P2-1A P2-1B P2-2A P2-2B P2-3A P2-3B
9 DIMMs
(RDIMMs only (
Note
)
P2-1A P2-1B P2-1C P2-2A P2-2B P2-2C P2-3A P2-3B P2-3C
Note
: Max. of 6 UDIMM modules are supported by a CPU.
Memory Population for Optimal Performance With Two CPUs Installed
CPU 1 (To Populate P1-DIMMs) CPU 2 (To Populate P2-DIMMs)
Branch 0 Branch 1 Branch 2 Branch 0 Branch 1 Branch 2
6 DIMMs P1-1A P1-2A P1-3A P2-1A P2-2A P2-3A
12 DIMMs P1-1A/1B P1-2A/2B P1-3A/3B P2-1A/1B P2-2A/2B P2-3A/3B
18 DIMMs
(For RDIMMs only)* P1-
1A/1B/1C P1-
2A/2B/2C P1-
3A/3B/3C P2-
1A/1B/1C P2-
2A/2B/2C P2-
3A/3B/3C
*
Max. of 6 UDIMM modules are supported by a CPU.