Supero SUPER P6SWA, User'S And Bios Manual

Page: 40 / 88

2-12
SUPER P6SWA/P6SWD
Manual
Installation
2-8 Parallel Port, AMR, Floppy and Hard Disk Drive
Connections
Use the following information to connect the floppy and hard disk drive cables.
• The floppy disk drive cable has seven twisted wires.
• A red mark on a wire typically designates the location of pin 1.
• A single floppy disk drive ribbon cable has 34 wires and two connectors to
provide for two floppy disk drives. The connector with twisted wires always
connects to drive A, and the connector that does not have twisted wires
always connects to drive B.
• The 80-wire ATA66 IDE hard disk drive cable that came with your system has
two connectors to support two drives. This special cable should be used to
take advantage of the speed this new technology offers. The blue connector
connects to the onboard IDE header and the other connector(s) to your hard
drive(s). Consult the documentation that came with your disk drive for details
on actual jumper locations and settings.