Supero SUPER P6SWA, User'S And Bios Manual

Page: 26 / 88

S
UPER P6SWA/P6SWD
Manual
1-18
Introduction
Wake-On-LAN (WOL)
Wake-On-LAN is defined as the ability of a management application to re-
motely power up a computer that is powered off. Remote PC setup, up-
dates and asset tracking can occur after hours and on weekends so that
daily LAN traffic is kept to a minimum and users are not interrupted.
The motherboards have a 3-pin header (WOL) to connect to the 3-pin
header on a Network Interface Card (NIC) that has WOL capability. Wake-
On-LAN must be enabled in BIOS (page 4-15). Note that Wake-On-Lan can
only be used with an ATX 2.01 (or above) compliant power supply.
1-5 Power Supply
As with all computer products, a stable power source is necessary for
proper and reliable operation. It is even more important for processors that
have high CPU clock rates of 300 MHz and above.
The SUPER P6SWA/P6SWD accommodates ATX power supplies. Although
most power supplies generally meet the specifications required by the CPU,
some are inadequate.
It is strongly recommended that you use a high quality power supply that meets
ATX power supply Specification 2.01 or above. Additionally, in areas where noisy
power transmission is present, you may choose to install a line filter to shield
the computer from noise. It is recommended that you also install a power surge
protector to help avoid problems caused by power surges.
Note: To support the keyboard wake-up function, your power supply must be
ATX 2.01 or higher and must provide a minimum standby voltage of 720 mA.