manualshive.com logo in svg

Supero SUPER 370SBA, User Manual, Page: 66 / 92

Share
Download
Supero SUPER 370SBA User Manual Download Page 66

SUPER 370SBA/370SBM/370SLA/370SLM

 User’s Manual

5-12

DMA0 Type

DMA1 Type

DMA2 Type

DMA3 Type

DMA5 Type

DMA6 Type

DMA7 Type

These options specify the bus that the specified DMA channel can be used

on.  The settings are 

PC/PCI

, 

Distributed

, or 

Normal ISA

.

Memory Buffer Strength

The settings for this option are 

Strong

, 

Median

, or 

Auto

.

Manufacturer’s Setting

Modes 0 through 4 are available.  

Note: The user should always set this

option to mode 0.  All other modes are for factory testing only

.

Power Management

Power Management

The settings for this feature are: 

APM

 or 

Disabled

.  Set to 

APM

 to enable

the power conservation feature specified by Intel and Microsoft INT 15h

Advance Power Management BIOS functions.

Power Button Function

This option specifies how the power button mounted externally on the

computer chassis is used.  The settings are: 

Suspend

 or 

On/Off

.  When set

to 

On/Off

, pushing the power button turns the computer on or off.  When

set to 

Suspend

, pushing the power button places the computer in Suspend

mode or Full On power mode.

Green PC Monitor Power State

This option specifies the power state that the green PC-compliant video

monitor enters when AMIBIOS places it in a power savings state after the

specified period of display inactivity has expired.  The settings are 

Standby

,

Suspend

 or 

Off

.

  Note: The Optimal default setting for this option is

Suspend and the Fail-Safe setting is Standby

.

Video Power Down Mode

This option specifies the power conserving state that the VGA video

subsystem enters after the specified period of display inactivity has expired.

The settings are 

Disabled

, 

Standby

, or 

Suspend

.  

Note: The Optimal

default setting for this option is Suspend and the Fail-Safe default

setting is Disabled

.

Summary of Contents for SUPER 370SBA





























































































Reviews:

No comments