Supero SUPER 370SBA User Manual Download Page 58

Page: 58 / 92

SUPER 370SBA/370SBM/370SLA/370SLM

User’s Manual

5-4

Pri Master ARMD Emulated as

Pri Slave ARMD Emulated as

Sec Master ARMD Emulated as

Sec Slave ARMD Emulated as

Options for Pri Master ARMD Emulated as, Pri Slave ARMD Emulated as,

Sec Master ARMD Emulated as and Sec Slave ARMD Emulated as are

Auto, Floppy

Hard disk

1st Boot Device

2nd Boot Device

3rd Boot Device

The options for 1st Boot Device are

Disabled, 1st IDE-HDD, 2nd IDE-HDD,

3rd IDE-HDD, 4th IDE-HDD, Floppy, ARMD-FDD, ARMD-HDD, ATAPI CD

ROM, SCSI, Network

. The options for 2nd Boot Device are

Disabled,

1st IDE-HDD, 2nd IDE-HDD, 3rd IDE-HDD, 4th IDE-HDD, Floppy, ARMD-

FDD, ARMD-HDD or ATAPI CD ROM

. The options for 3rd Boot Device are

Disabled, 1st IDE-HDD, 2nd IDE-HDD, 3rd IDE-HDD, 4th IDE-HDD, Floppy,

ARMD-FDD, ARMD-HDD or ATAPI CD ROM

1st IDE-HDD, 2nd IDE-HDD, 3rd IDE-HDD and 4th IDE-HDD are the four

hard disks that can be installed by the BIOS. 1st IDE-HDD is the first hard

disk installed by the BIOS, 2nd IDE-HDD is the second hard disk, and so

on. For example, if the system has a hard disk connected to Primary Slave

and another hard disk to Secondary Master, then 1st IDE-HDD will be

referred to as the hard disk connected to Primary Slave and 2nd IDE-HDD

will be referred to as the hard disk connected to the Secondary Master.

3rd IDE-HDD and 4th IDE-HDD are not present. Note that the order of the

initialization of the devices connected to the primary and secondary

channels are Primary Master first, Primary Slave second, Secondary Master

third, and Secondary Slave fourth.

The BIOS will attempt to read the boot record from 1st, 2nd, 3rd and 4th

boot device in the selected order until it is successful in reading the booting

record. The BIOS will not attempt to boot from any device which is not

selected as the boot device.

Try Other Boot Device

This option controls the action of the BIOS if all the selected boot devices

failed to boot. The settings for this option are

Yes

. If

Yes

selected and all the selected boot devices failed to boot, the BIOS will try

to boot from the other boot devices (in a predefined sequence) which are

present but not selected as boot devices in the setup (and hence not yet

Summary of Contents for SUPER 370SBA





























































































Search results

Summary of Contents for SUPER 370SBA

Reviews:

Related manuals for SUPER 370SBA

Brands by name

Popular brands

Supero SUPER 370SBA, User Manual

Search results

Summary of Contents for SUPER 370SBA

Reviews:

Related manuals for SUPER 370SBA

Brands by name

Popular brands