Supero SUPER 370SBA, User Manual, Page: 38 / 92

2-8
SUPER 370SBA/370SBM/370SLA/370SLM
User's Manual
Top View of DIMM Socket
Figure 2-1. Installing the DIMM
To Install:
Insert
vertically,
press down
until it snaps
into place.
Pay attention
to the two
notches.
To Remove:
Use your thumb to
gently push the
edge of the socket
and release the
module. Do this on
both sides for each
module.
Note: Notches
should align
with the
receptive points
on the socket
D I M M S o c k e t
Side View of DIMM Installation into Socket
DIMM
P C 1 0 0
Notches
P C 1 0 0
Notches
2-6 Installing the DIM Modules
CAUTION
Exercise extreme care when installing or removing the DIM
modules to prevent any possible damages.
1. Insert DIM modules (DIMMs) in Bank 0 through Bank 3 as required for
the desired system memory.
2. Insert each DIMM vertically into its socket. Pay attention to the two
notches to prevent inserting the DIMM at a wrong position. The
component side of the DIMM must face the CPU socket. The prior
statement is applicable for DIMMs with components on one side only.
3. Gently press the DIMM until it snaps upright into place in the socket.
4. For best results, install DIMM starting from Bank 0 (the DIMM socket
farthest from BX or LX chip).