5-7
Chapter 5: Chassis Setup and Maintenance
4. Remove the rails from the drive tray by removing two screws from each side.
(Figure 5-7)
5.
Attach the rails to a DVD drive, CD drive, floppy drive, or other peripheral. The
rails should fit any standard sized peripheral.
6. Slide the drive into the chassis until it clicks into place.
Drive Rails
Drive Tray
Figure 5-7. Removing Rails from the Drive Tray
Adding Peripheral Drives to the Drive Bays
Replace a drive tray with a peripheral drive.
1. Open the chassis cover.
2. Locate the release tab for the drive tray where you want to place the peripheral
drive (Figure 5-5).
3. Push the drive tray toward the front of the chassis.
