Supero PDSLM, User Manual

Page: 61 / 81

Chapter 4: AMI BIOS
4-11
Serial Port2 Address
This option specifi es the base I/O port address and the Interrupt Request address of
Serial Port 2. Select Disabled to prevent the serial port from accessing any system
resources. When this option is set to Disabled, the serial port physically becomes
unavailable. Select 2F8/IRQ3 to allow the serial port to use 2F8 as its I/O port ad-
dress and IRQ 3 for the interrupt address. The options are Disabled, 2F8/IRQ3 ,
3E8/IRQ4 and 2E8/IRQ3.
Remote Access Confi guration
You can use this screen to select options for the Remote Access Confi guration.
Use the up and down arrow keys to select an item. Use the <+> and <-> keys to
change the value of the selected option.
Serial Port Number
This feature allows the user to select the serial port for console redirection. The
options are COM-A and COM-B.
Base Address, IRQ
This feature allows the user to set the Base Address and IRQ settings for COM-
A or COM-B. The default setting for COM-A is 3F8h, 4 . The default setting for
COM-b is 2F8h, 8 .
Serial Port Mode
This feature allows the user to set the serial port mode for console redirection.
The options are 115200 8, N , 1; 57600 8, N, 1; 38400 8, N, 1; 19200 8, N, 1;
and 9600 8, N, 1.
Flow Control
This feature allows the user to set the fl ow control for console redirection. The
options are None , Hardware, and Software.
Redirection After BIOS POST
Select Disabled to turn off console redirection after Power_On_Self_Test
(POST). Select Always to keep console redirection active all the time after
POST. ( Note : This setting may not be supported by some operating systems.)
Select Boot Loader to keep console redirection active during POST and Boot
Loader. The options are Disabled , Boot Loader, and Always.
Terminal Type
This feature allows the user to select the target terminal type for console
redirection.The options are ANSI , VT100, and VT-UTF8.